 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Aluminum Electrolytic Capacitors/ TA Radial Lead Type Series: TA Type: A Features Endurance: 125 C 2000 h Heat cycle: 1000 cycle -40 C to +125 C RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan -40 C to + 125 C 10 V .DC to 63 V .DC 1 F to 4700 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) W.V.(V) 10 16 25 35 50 63 (120Hz / +20 C) tan 0.20 0.16 0.14 0.12 0.10 0.09 For capacitance value > 1000 F , add 0.02 per every 1000 F. After following life test with DC voltage and +125 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours, when the capacitors are restored to 20 C, the capacitors, shall meet the limits specified below. Endurance Capacitance change 30% of initial measured value tan < 300 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +125 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V. (V.DC) 1 10 to 63 470 2200 Cap. (F) to to to 330 1000 4700 Frequency (Hz) 60 0.55 0.70 0.75 120 0.65 0.75 0.80 1k 0.85 0.90 0.90 10 k 0.90 0.95 0.95 100 k 1.00 1.00 1.00 Dimensions in mm (not to scale) [mm] Sleeve Pressure relief d0.05 8 10< + - L 14 min. 3 min. D0.5 F0.5 D0.5 L<16 : L1.0 L>20 : L2.0 (16 15, 18 15 : L1.5) (mm) Body Dia. D Lead Dia. d Lead space F 8 0.6 3.5 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 18 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2009 - EE102 - Aluminum Electrolytic Capacitors/ TA Standard Products Case size W.V. Cap. (20 %) (F) 330 470 1000 Dia. (mm) 8 10 10 12.5 12.5 16 18 16 18 16 18 8 10 10 12.5 12.5 16 16 18 16 18 18 8 10 10 10 12.5 12.5 16 18 16 18 18 10 10 10 12.5 16 16 18 18 Specification Ripple ImpedCurrent ance Length (100 kHz) (100 kHz) (+125 C) (+20 C) () (mm) (mA r.m.s.) 11.5 12.5 20 15 25 20 15 25 20 31.5 25 11.5 12.5 16 12.5 20 15 25 20 31.5 25 31.5 11.5 12.5 16 20 15 25 20 15 31.5 25 35.5 12.5 16 20 20 15 25 20 35.5 500 680 1100 1085 1750 1985 1800 2300 2250 2710 2470 500 680 945 865 1490 1520 2300 2250 2710 2470 3270 500 680 945 1100 1085 1750 1985 1800 2710 2470 3310 555 765 930 1330 1450 2010 2180 2790 0.130 0.100 0.057 0.070 0.033 0.032 0.042 0.024 0.031 0.020 0.022 0.130 0.100 0.075 0.105 0.042 0.047 0.024 0.031 0.020 0.022 0.018 0.130 0.100 0.075 0.057 0.070 0.033 0.032 0.042 0.020 0.022 0.017 0.180 0.130 0.100 0.070 0.088 0.037 0.046 0.025 Lead Length Lead Dia. Lead Space Straight (mm) 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 (mm) 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 Taping B (mm) 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 EEUTA1A331( ) EEUTA1A471( ) EEUTA1A102( ) EEUTA1A102S( ) EEUTA1A222L( ) EEUTA1A222( ) EEUTA1A222S( ) EEUTA1A332( ) EEUTA1A332S( ) EEUTA1A472 EEUTA1A472S( ) EEUTA1C221( ) EEUTA1C331( ) EEUTA1C471( ) EEUTA1C471S( ) EEUTA1C102( ) EEUTA1C102S( ) EEUTA1C222( ) EEUTA1C222S( ) EEUTA1C332 EEUTA1C332S( ) EEUTA1C472 EEUTA1E101( ) EEUTA1E221( ) EEUTA1E331( ) EEUTA1E471( ) EEUTA1E471S( ) EEUTA1E102L( ) EEUTA1E102( ) EEUTA1E102S( ) EEUTA1E222 EEUTA1E222S( ) EEUTA1E332 EEUTA1V101( ) EEUTA1V221( ) EEUTA1V331( ) EEUTA1V471( ) EEUTA1V471S( ) EEUTA1V102( ) EEUTA1V102S( ) EEUTA1V222 Part No. Straight Taping Leads (pcs) 200 200 200 200 200 100 100 100 100 100 100 200 200 200 200 200 100 100 100 100 100 50 200 200 200 200 200 200 100 100 100 100 50 200 200 200 200 100 100 100 50 (pcs) 1000 500 500 500 500 250 250 250 250 250 1000 500 500 500 500 250 250 250 250 1000 500 500 500 500 500 250 250 250 500 500 500 500 250 250 250 Min. Packaging Q'ty (V) 10 2200 3300 4700 220 330 470 1000 2200 3300 4700 100 220 330 470 25 1000 16 2200 3300 100 220 330 35 470 1000 2200 Endurance : 125 C 2000 h When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2009 - EE103 - Aluminum Electrolytic Capacitors/ TA Standard Products Case size W.V. Cap. (20 %) (F) 1 2.2 3.3 4.7 10 22 33 47 100 220 330 Dia. (mm) 8 8 8 8 8 8 8 8 10 10 12.5 16 12.5 16 18 16 18 8 10 10 12.5 10 12.5 16 18 16 18 16 18 Specification Ripple ImpedCurrent ance Length (100 kHz) (100 kHz) (+125 C) (+20 C) () (mm) (mA r.m.s.) 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 12.5 20 20 15 25 20 15 31.5 25 11.5 12.5 16 12.5 20 25 20 15 25 20 31.5 25 35 50 60 85 180 250 300 440 555 930 1330 1450 1650 1650 1710 2430 2350 310 410 460 650 680 1325 1360 1300 1660 1760 2055 1990 2.00 1.80 1.50 1.15 0.950 0.650 0.450 0.350 0.180 0.100 0.070 0.088 0.055 0.053 0.075 0.031 0.032 0.470 0.360 0.270 0.240 0.205 0.100 0.085 0.120 0.070 0.077 0.060 0.060 Lead Length Lead Dia. Lead Space Straight (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 (mm) 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 Taping B (mm) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 EEUTA1H1R0( ) EEUTA1H2R2( ) EEUTA1H3R3( ) EEUTA1H4R7( ) EEUTA1H100( ) EEUTA1H220( ) EEUTA1H330( ) EEUTA1H470S( ) EEUTA1H101( ) EEUTA1H221( ) EEUTA1H331( ) EEUTA1H331S( ) EEUTA1H471L( ) EEUTA1H471( ) EEUTA1H471S( ) EEUTA1H102 EEUTA1H102S( ) EEUTA1J220( ) EEUTA1J330( ) EEUTA1J470( ) EEUTA1J470S( ) EEUTA1J101( ) EEUTA1J221L( ) EEUTA1J221( ) EEUTA1J221S( ) EEUTA1J331( ) EEUTA1J331S( ) EEUTA1J471 EEUTA1J471S( ) Part No. Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 200 200 200 200 200 200 100 100 100 100 100 100 (pcs) 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 250 500 250 250 250 1000 500 500 500 500 500 250 250 250 250 250 Min. Packaging Q'ty (V) 50 470 1000 22 33 47 100 63 220 330 470 Endurance : 125 C 2000 h When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2009 - EE104 - |
Price & Availability of EEUTA1A331
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |